Skip to main content
  • Research article
  • Open access
  • Published:

Working with patients and the public to design an electronic health record interface: a qualitative mixed-methods study

Abstract

Background

Enabling patients to be active users of their own medical records may promote the delivery of safe, efficient care across settings. Patients are rarely involved in designing digital health record systems which may make them unsuitable for patient use. We aimed to develop an evidence-based electronic health record (EHR) interface and participatory design process by involving patients and the public.

Methods

Participants were recruited to multi-step workshops involving individual and group design activities. A mixture of quantitative and qualitative questionnaires and observational methods were used to collect participant perspectives on interface design and feedback on the workshop design process.

Results

48 recruited participants identified several design principles and components of a patient-centred electronic medical record interface. Most participants indicated that an interactive timeline would be an appropriate way to depict a medical history. Several key principles and design components, including the use of specific colours and shapes for clinical events, were identified. Participants found the workshop design process utilised to be useful, interesting, enjoyable and beneficial to their understanding of the challenges of information exchange in healthcare.

Conclusion

Patients and the public should be involved in EHR interface design if these systems are to be suitable for use by patient-users. Workshops, as used in this study, can provide an engaging format for patient design input. Design principles and components highlighted in this study should be considered when patient-facing EHR design interfaces are being developed.

Peer Review reports

Background

Digital health technologies, including Electronic Health Records (EHRs), are increasingly used across all levels of healthcare [1]. Many digital systems are expanding to incorporate patient portals, patient reported outcomes, patient generated data, and social determinants of health [2,3,4,5,6]. Patient engagement with health records may have several benefits including patient satisfaction and better monitoring and management of chronic diseases, where care coordination is complex and frequently requires patient and carer engagement [5, 7, 8]. Previous attempts to help patients to take a more active role their own care through EHR portals have been limited due to a lack of accessibility, functionality, interoperability [9] and perceived dehumanisation of patients and their story associated with these electronic systems [10, 11]. If patient-accessible records are to succeed in improving patient-centred care, a human-factors derived, data-driven approach to new systems or improvements is required. Improved patient-facing interfaces using graphic representation of healthcare information is a clear mechanism to improve the utility of these records [12].

There are several examples of participatory design and patient and public involvement and engagement being successfully used to guide clinical service improvement and healthcare technology design [13,14,15,16]. These approaches attempt to involve key stakeholders in the design process to ensure that the output meets their needs and is usable [13]. Specific design and research methodologies to implement participatory design principles are not well documented in the medical and informatics literature.

This work aimed to develop an evidence-based electronic medical record interface and design process by involving and engaging patients and the public. Through structured workshops we aimed to provide a collaborative setting to guide the design of a digital interface to improve patient engagement with their medical records.

Material and methods

Design

This study used a mixed-method design incorporating questionnaires and observational methods within the framework of a workshop. An initial workshop pilot study was followed by the delivery of two multi-step workshops.

The workshop structure was used to provide a systematic framework for the research and design methods selected. The term ‘workshop’ generally refers to a process of creative group problem-solving [17]. The application of workshops as a research methodology therefore carries dual purposes of fulfilling participants’ expectations to achieve something related to their own interests, while producing reliable and valid data about the domain in question [18].

Principles of participatory design were applied throughout the workshops. Participatory design focuses on allowing the user to be a legitimate and acknowledged participant in the design process [19] and gives voices to those who are not in positions of power and decision making [20]. Participatory design has been shown to be a productive research tool to guide solutions to patient problems and clinical processes [21,22,23].

Setting

Two back-to-back, identical workshops involving different participants were conducted. The duration of each workshop was 90 min. Three facilitators, all with some previous experience in facilitating group forums and/or participatory design workshops coordinated the sessions. One facilitator was a practicing clinician with a research interest in patient safety and digital health (LW). Two facilitators (including MH) had a background in healthcare graphic design and health technology development.

Participant recruitment

To achieve the aims of this project, a sample of the general public was deemed the most appropriate and accessible target group. We aimed to recruit a broad range of ages and backgrounds, whilst ensuring an accessible method of recruitment for potential participants. To limit barriers to recruitment and to conform with our institutional approval for this project, we did not request patients to provide their own personal medical histories or active health issues during the study. Participants were recruited through advertisement of the session on a publicly accessible website, links to which were disseminated through social media applications. Limited spaces were also made available for walk-in participants on the day of the workshop. Registration for the workshop was conducted on a first-in, first-served basis. Capacity was limited to 25 participants per session. Participation in the workshop was voluntary and unpaid.

Procedure

Design of the workshop procedure was based on participatory design principles [24, 25] and previously validated workshop methods including the use of case vignettes and step-by-step workshop methods published in the literature [14, 15]. An initial pilot study was conducted with four participants recruited via opportunistic sampling to trial and validate the workshop procedure. Feedback from the pilot study assisted in guiding the structure and content of the formal workshops including additional contextual information during the first step and additional time to complete design activities.

Two identically structured workshop sessions followed a seven-step procedure illustrated in Fig. 1 and outlined in further detail below:

Fig. 1
figure 1

Steps of workshop procedure and data collection schedule, including composition of groups, duration of activity and data collection methods

Introduction to problem

An initial introduction to the workshop and evidence-based review of existing problems with electronic health records and health information exchange during patient transitions of care (TOC) was provided. Participants were shown examples of existing digital medical record interfaces and encouraged to consider how the design of these might be improved for patients. An overview of the workshop procedure and objectives was provided along with the opportunity for questions from participants.

Individual design activity

Workshop participants were invited to complete two questionnaires relating to design in healthcare. Questionnaires related to A) associations between colours and common clinical events and B) associations between shapes and common clinical events. Each clinical event could be matched to only one colour or shape. Each colour or shape could be used more than once. Questionnaires were completed anonymously and individually.

Background to design in healthcare

A presentation on the role and importance of design in healthcare was provided to participants. This was a didactic presentation that provided examples of innovative and successful design approaches that addressed healthcare problems, including transitions of care.

Small group vignette activity

This interactive segment of the workshop required participants to work in small groups of 4 or 5 to develop a prototype interface design to graphically depict a patient medical history. One of five fictional clinical vignettes, each containing approximately 10 clinical events, were provided to participants. Each participant was initially provided with an open-ended questionnaire that related to the graphical depiction of a patient medical history. The 4 questions within this questionnaire covered perspectives on design principles, design structure and design elements including graphics and colours. These questionnaires were completed independently prior to the group work. In groups, designs were then produced using cardboard cut-outs and coloured pens on paper to depict the interface of a computer, tablet or smartphone device.

Group presentation and feedback

Following the group task, participants nominated a group member to present the group prototype to the researchers and other workshop participants. They were asked to describe the overall structure of the design and specific details that they felt would benefit communication of the data provided with a potential user. Observation of interface design prototypes was conducted retrospectively using photographs of all designs which were independently analysed and categorised by two researchers.

Debrief

This short segment facilitated an interactive group discussion regarding the tasks performed and overall perspectives on the workshop session within the setting of an open forum.

Workshop feedback and evaluation

Individual evaluation of the workshop was undertaken by participants using a structured questionnaire. Questions covered the workshop experience and participant perspectives on the utility of the workshop to addressing the problem presented in step 1. Evaluation questionnaire forms were confidential and anonymous.

Instruments

Colour and shape association questionnaires (step 2) used a closed-ended category-matching format and the design principles questionnaire used an open-ended format with 4 questions. The clinical events used in the questionnaires were developed using a process of identification and refinement through consensus with 2 active clinicians with over 5 years of healthcare experience (including LW). Vignettes were also developed by 2 clinicians and each aimed to capture a range of common clinical events including new diagnoses, investigations and interventions for each fictitious patient. These were written as a text block to minimise seeding of design structure. Verbal design briefs were provided by a clinician (LW) and healthcare graphic designer (MH) and aimed to be broad to limit bias. Evaluation questionnaires used in step 7 included 12 multi-point Likert scale questions.

Outcomes

The primary outcome for this study was interface design principles and components for digital medical records. Patient and public perspectives on, and satisfaction with, the workshop procedure as an educational tool and participatory design process was also evaluated.

Data analysis

Ordinal data from Likert scales was collated and analysed using Microsoft Excel. Qualitative content analysis from open-ended questionnaire sections was analysed using a Framework Method [26]. Content was initially reviewed line-by-line by two researchers independently. An inductive approach using open coding and development of an analytical framework preceded the generation of emerging themes. Themes were then refined, discussed between researchers to reach consensus and interpreted for discussion.

Retrospective observational analysis of the group task output was restricted to overall themes due to the complexity of content and to minimise the impact of bias. Themes for designs were allocated based on the thematic analysis of designs generated during the open-ended individual questionnaire responses during step 4. Using these themes, group prototype designs were classified into one of three categories; a) timeline design, b) anatomical design, c) other design. Analysis of photographs of interface designs was undertaken independently by two members of the research team (LW, MH).

Results

Clinical event colour association

A total of 48 participants were recruited and attended the workshop sessions. 40 participants undertook the task requiring the matching of 12 clinical events with 12 colours. There was consensus between participants for a principal colour match for several clinical events, as illustrated in (Fig. 2a). 56.4% (22/39) of participants indicated that a blood test should be graphically represented by the colour red, 50% (19/38) indicated that ‘living at home’ was appropriately indicated by white and 47.4% (18/38) that red was the best colour to associate with an Intensive Care Unit admission. Imaging was felt to be best represented by black (25.7% (9/35)) or grey (25.7% (9/35)).

Fig. 2
figure 2

Association of colours (a) and shapes (b) to clinical events and relative frequency of principal choice(s)

Clinical event shape association

40 participants undertook the task requiring the matching of 12 clinical events with 9 shapes. Participants independently agreed on a principal shape match as illustrated in (Fig. 2b) for several clinical events. Of the presented shapes, 45.9% (17/37) of participants felt that a hospital admission was most appropriately depicted with a cross, 41.7% (15/36) allocated a triangle to an operation and 39.5% (15/38) a circle to the birth of a child.

Design principles

Several themes relating to the design of a digital transitions of care tool were identified following coding and thematic analysis of responses to the design principles questionnaire. Three key themes were agreed upon through consensus, each with several sub-themes allocated. Key themes identified were:

Overall design principles

Several participants noted that an interface design should focus on simplicity, clarity, beauty and user-friendliness. They felt that a design should be intuitive, engaging and enjoyable to use. They emphasised the importance of accuracy of information, the ability to rapidly assess information and the need to incorporate the diversity of disease. Some participants proposed that there should be a ‘hierarchy of information’ where emphasis is placed on more important, severe or relevant medical problems.

Design structure

Most participants commented that the structure of an interface design should be simple. Several overarching design structures emerged including a timeline design, anatomical-based design, calendar design and more abstract designs such as a cabinet with drawers corresponding to different medical problems.

Design elements

Participants identified the utility of interactive features and the use of infographics. Emphasis was placed on the use of colours, in particular the use of bright, primary colours and the use of colour to represent disease status, severity or corresponding medical specialty. Some participants suggested the use of warm colours such as red, orange and yellow to reflect severe problems and blue or green for a normal, non-active state. The use of either geometric or organic shapes was suggested as an important interface design element.

Group vignette activity

10 small groups of 4 or 5 participants generated ten prototype interface designs through the small group vignette tasks. There was agreement between researchers on the categorisation of all designs. 6 (60%) prototypes were identified as using a timeline-based design, 2 (20%) prototypes used an anatomy-based design and 2 (20%) prototypes used other designs.

Workshop evaluation

Quantitative evaluation questionnaires were undertaken by 43 participants. Non-responses to individual questions were excluded from analysis. Outcomes from the Likert-type scales are shown in Fig. 3. All responding participants found the workshop interesting and enjoyable. 78.6% (33/42) of participants felt that the workshop was useful and 79.1% (34/43) reported that it improved their understanding of the challenges of health information exchange during transitions of care. 47.6% (20/42) of participants felt that the workshop improved their understanding of the health care system and 39% (16/41) indicated that they will change their communication with healthcare professionals following the workshop.

Fig. 3
figure 3

Participant evaluation of workshop from a 3-point Likert-type scale (Disagree, Neutral, Agree)

Development of a prototype interface using workshop output

Following completion of the workshops, the research team developed a prototype EHR interface design using the key design principles identified in the workshops. This prototype design is shown in Fig. 4. The shapes and colours that workshop participants felt best reflected particular clinical events were used within the prototype design. Where workshop participants had selected the same colours for different clinical events, such as operations and complications, different shades of these colours were used in the prototype design. An interactive, digital version of this interface has been developed and will be compared with existing EHR interfaces currently in use.

Fig. 4
figure 4

Prototype EHR interface design based on input from workshop participants

Discussion

This report describes the methods and outcomes of a novel approach to obtaining patient and public perspectives on the design of a digital medical record interface. Through the provision of two structured workshops, several design principles and components that are important to healthcare users were identified and a prototype design was developed.

Design principles and components for digital medical records

The identification of design principles and components in this work complements and expands upon previous experimental work on patient portals [27]. The use of a timeline to graphically depict a patient history was identified as a suitable structural design element. This finding may indicate an inclination for patients to consider their medical history chronologically, which may differ from provider approaches which may often be system or disease-based [28]. Participants identified that digital medical record interfaces should be clear, simple, intuitive and include the use of colours and geometric graphics. Findings from questionnaires in this study indicate that there is consensus between patients on the use of specific colours or shapes to depict particular clinical events. Specific design elements identified, such as the use of a red circle to indicate a previous or upcoming blood test, may provide guidance for interface design across multiple health design applications. The use of colours and geometric shapes that were identified as suitable to indicate several different healthcare events, such as the colour red and circles, triangles or crosses, may require further user input to minimise overlap between these elements in interfaces. Alternatively, the use of different shades of the colours may be used, as was done in the prototype interface developed by our group shown in Fig. 4. Further work in this area to incorporate the design perspectives of other stakeholders such as providers and researchers would be beneficial and is a focus of future work for our group. We intend to use data from these studies to further guide, develop and test the prototype interface. The outcomes of comparisons of these interfaces with existing vendor interfaces will be addressed separately to this report.

Improving healthcare quality and safety through better design

Healthcare is a high-risk industry and unsuitable design may lead to errors [29]. There are several examples of the use of graphic design to improve patient safety such as the design of tobacco packaging and public health information [30, 31]. New health-related digital technologies should be appropriately researched, designed and evaluated to reflect this [32]. Often, the important role of patients and the public in evaluating and redesigning care processes and digital systems has been neglected [6]. This work has demonstrated that novel and engaging methods of involving patients and the public can be both enjoyable for participants and constructive in their output.

There are several potential benefits of increased patient engagement with medical records, including an improved understanding of medical conditions and better preparation for visits with providers [2]. Interfaces that appeal to both patients and providers may act as a ‘boundary object’ to bridge functional knowledge and power gaps across different stakeholder positions during transitions of care [33]. Use of the design elements identified in this work may aid comprehension and synthesis of healthcare events, allowing patients to be more engaged with their healthcare journey and therefore improve safety during transitions of care.

Workshop as a research and design process

The use of a workshop as a research and design tool has both benefits and limitations. Workshops follow a pre-defined, though not predictable, purpose [18] that allows participants to be involved in a process that achieves a goal. There are several examples of workshops being used in health service improvement and technology design [14,15,16]. Responses from the evaluation questionnaire indicated that participants found the workshop process used for this project to be enjoyable, useful and interesting. Participants indicated that this workshop stimulated their interest in being involved in future healthcare design work, further emphasising the potential value of the methods described in healthcare research and development. The research methods incorporated within the workshop generated valuable data to guide future healthcare research and design. The participatory design approaches used in this study could be used to better include patients and the public in the design of digital health technologies. The seven-step workshop framework described may be adapted and applied to other patient safety and healthcare issues.

Limitations

The recruitment process used did not deliberately identify particular medical pathologies or medical histories. Similarly, we did not select or seek information relating to participant backgrounds or levels of health and information technology literacy. This approach was used to ensure that recruitment was simple and achieved sufficient participant numbers and to comply with personal data regulations and institutional approval for this study. Further studies looking at perspectives from more homogeneous patient subsets with differing healthcare experiences may enable targeting of design components for specific patient groups. This study used validated research methods within a novel workshop framework. The educational components within the workshop were structured to limit the introduction of bias to the research components. Some workshop participants did not partake in the questionnaire which reduced the yield of results. The closed-ended colour and shape-matching questionnaires were conducted prior to the design principles questionnaire and group tasks. This may have exposed participants to potential seeding and bias in subsequent responses including the use of colour and shapes in designs. Direct comparison of the developed prototype interface with existing EHR interfaces was not conducted in this study but is a future focus for our research group.

Conclusion

The involvement and engagement of patients and the public is critical in ensuring that the design of digital technologies is patient-centred. Specific design principles and elements identified in this study should be considered when developing patient-facing digital medical record interfaces. This study has shown that patients value the role that they have to play in improving the quality and safety of healthcare technology and processes. Structured workshops can provide a suitable and enjoyable methodology for research and design involving patients and the public. Further research to expand and develop both the frequency and quality of patient input into health technology design are warranted.

Availability of data and materials

The datasets and materials used and/or analysed during the current study are available from the corresponding author on reasonable request.

Abbreviations

EHR:

Electronic Health Record

PPI:

Patient and Public Involvement

TOC:

Transition of Care

References

  1. Gummadi S, Housri N, Zimmers TA, Koniaris LG. Electronic medical record: a balancing act of patient Safety privacy health care delivery. Am J Med Sci. 2014;348(3):238–43.

    Article  Google Scholar 

  2. Rexhepi H, Åhlfeldt R-M, Cajander Å, Huvila I. Cancer patients’ attitudes and experiences of online access to their electronic medical records: a qualitative study. Health Informatics J. 2018;24(2):115–24.

    Article  Google Scholar 

  3. Pearce C, Bainbridge M. A personally controlled electronic health record for Australia. J Am Med Informatics Assoc. 2014;21(4):707–13.

    Article  Google Scholar 

  4. Adler-Milstein J, Sarma N, Woskie LR, Jha AK. A comparison of how four countries use health IT to support care for people with chronic conditions. Health Aff. 2014;33(9):1559–66.

    Article  Google Scholar 

  5. Irizarry T, De Vito DA, Curran CR. Patient portals and patient engagement: a state of the science review. J Med Internet Res. 2015;17(6):e148.

    Article  Google Scholar 

  6. Jilka SR, Callahan R, Sevdalis N, Mayer EK, Darzi A. “Nothing about me without me”: An interpretative review of patient accessible electronic health records. J. Med. Internet Res. 2015;17(6):e161.

    Article  Google Scholar 

  7. Kruse CS, Argueta DA, Lopez L, Nair A. Patient and provider attitudes toward the use of patient portals for the management of chronic disease: A systematic review. J. Med. Internet Res. 2015;17(2):e40.

    Article  Google Scholar 

  8. Gordon K, Smith F, Dhillon S. Effective chronic disease management: patients’ perspectives on medication-related problems. Patient Educ Couns. 2007;65(3):407–15.

    Article  Google Scholar 

  9. Perlin J. Health information technology interoperability and use for better care and evidence. JAMA. 2016;316(16):1667–8.

    Article  Google Scholar 

  10. Sittig DF, Singh H. Electronic health records and National Patient-Safety Goals. N Engl J Med. 2012;367(19):1854–60.

    Article  CAS  Google Scholar 

  11. Walsh SH. The clinician’s perspective on electronic health records and how they can affect patient care. BMJ. 2004;328:1184–7.

    Article  Google Scholar 

  12. Zulman DM, Shah NH, Verghese A. Evolutionary pressures on the electronic health record. JAMA. 2016;316(9):923.

    Article  Google Scholar 

  13. Sanders EB-N, Stappers PJ. Co-creation and the new landscapes of design. CoDesign. 2008;4(1):5–18.

    Article  Google Scholar 

  14. Wherton J, Sugarhood P, Procter R, Hinder S, Greenhalgh T. Co-production in practice: How people with assisted living needs can help design and evolve technologies and services. Implement Sci. 2015;10(1):75.

    Article  Google Scholar 

  15. Boyd H, McKernon S, Mullin B, Old A. Improving healthcare through the use of co-design. N Z Med J. 2012;125(1357):76–87.

    PubMed  Google Scholar 

  16. Muller MJ. Participatory design: The third space in HCI. Human-Computer Interact Dev Process. 2003;4235:1051–68.

    Google Scholar 

  17. Osborn AF. Applied imagination. New York: Scribner; 1957.

    Google Scholar 

  18. Ørngreen R, Levinsen K. Workshops as a research methodology. Electron J e-Learning. 2017;15(1):70–81.

    Google Scholar 

  19. Simonsen J, Robertson T. Participatory design: an introduction. In: Routledge international handbook of participatory design; 2013.

    Google Scholar 

  20. Danbjørg DB, Wagner L, Clemensen J. Designing, developing, and testing an app for parents being discharged early postnatally. J Nurse Pract. 2014;10(10):794–802.

    Article  Google Scholar 

  21. Danbjørg DB, Wagner L, Kristensen BR, Clemensen J. Intervention among new parents followed up by an interview study exploring their experiences of telemedicine after early postnatal discharge. Midwifery. 2015;31(6):574–81.

    Article  Google Scholar 

  22. Robertson T, Wagner I. Engagement, representation and politics-in-action. In: Routledge International Handbook of Participatory Design; 2016.

    Google Scholar 

  23. Clemensen J, Rothmann MJ, Smith AC, Caffery LJ, Danbjorg DB. Participatory design methods in telemedicine research. J Telemed Telecare. 2017;23(9):780–5.

    Article  Google Scholar 

  24. Kushniruk A, Nøhr C. Participatory design, user involvement and health IT evaluation. Stud Health Technol Inform. 2016;222:139–51.

    PubMed  Google Scholar 

  25. Lyng KM, Pedersen BS. Participatory design for computerization of clinical practice guidelines. J Biomed Inform. 2011;44(5):909–18.

    Article  CAS  Google Scholar 

  26. Gale NK, Heath G, Cameron E, Rashid S, Redwood S. Using the framework method for the analysis of qualitative data in multi-disciplinary health research. BMC Med Res Methodol. 2013;13(1):117.

    Article  Google Scholar 

  27. Fraccaro P, Vigo M, Balatsoukas P, Van Der Veer SN, Hassan L, Williams R, et al. Presentation of laboratory test results in patient portals: Influence of interface design on risk interpretation and visual search behaviour. BMC Med Inform Decis Mak. 2018;18(1):11.

    Article  Google Scholar 

  28. Green AR, Carrillo JE, Betancourt JR. Why the disease-based model of medicine fails our patients. West J Med. 2002;176(2):141–3.

    PubMed  PubMed Central  Google Scholar 

  29. Dhavle AA, Yang Y, Rupp MT, Singh H, Ward-Charlerie S, Ruiz J. Analysis of prescribers’ notes in electronic prescriptions in ambulatory practice. JAMA Intern Med. 2016;176(4):463–70.

    Article  Google Scholar 

  30. Mcneill A, Gravely S, Hitchman SC, Bauld L, Hammond D, Hartmann-Boyce J. Tobacco packaging design for reducing tobacco use. Cochrane Database Syst. Rev. 2017;4:CD011244.

    PubMed  Google Scholar 

  31. The Department of Health and The Design Council. Design for patient safety: a system-wide design-led approach to tackling patient safety in the NHS. [Internet]. 2003. Available from: https://www-edc.eng.cam.ac.uk/downloads/bloodbag.pdf. Accessed 10 Feb 2019.

  32. British Standards Institute. Medical Devices - Part 1: Application of usability engineering to medical devices [Internet]. London: 2015. Available from: https://www.iso.org/standard/63179.html. Accessed 10 Feb 2019.

  33. Bergman M, Lyytinen K, Mark G. Boundary objects in design: an ecological view of design artifacts. J Assoc Inf Syst. 2007;8(11):546–68.

    Google Scholar 

  34. INVOLVE/National Research Ethics Service. Patient and public involvement in research and research ethics committee review [Internet]. 2009. Available from: http://www.invo.org.uk/wp-content/uploads/2011/12/INVOLVENRESfinalStatement310309.pdf. Accessed 10 Feb 2019.

Download references

Acknowledgements

We thank the Wellcome Collection for their support through the provision of infrastructure and materials for the workshop.

Funding

This article refers to independent research supported the National Institute for Health Research (NIHR) Imperial Patient Safety and Translational Research Centre (PSTRC). Infrastructure support was provided by the NIHR Imperial Biomedical Research Centre (BRC). Funders had no role in the writing of the manuscript or decision to submit for publication.

Author information

Authors and Affiliations

Authors

Contributions

LW and MH were involved in all aspects of the study. SA, AD were involved in the planning, interpretation, writing and reviewing of the study. All authors have read and approved the final version of the manuscript.

Corresponding author

Correspondence to Leigh R. Warren.

Ethics declarations

Ethics approval and consent to participate

This project was an exercise in patient and public involvement in the development of a new product and a service evaluation of patient information systems. Further ethical approval was not required, as indicated by our local Research and Development body and in line with the National Research Ethics Service (NRES) and INVOLVE joint statement on the position of ethics and PPI [29, 34]. No identifying personal or medical information was obtained or recorded for the purposes of research or any other use. All participants provided written consent for images and output from the workshop to be published.

Consent for publication

Participants involved in this study provided consent for publication.

Competing interests

The authors declare that they have no competing interests.

Additional information

Publisher’s Note

Springer Nature remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

Rights and permissions

Open Access This article is distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution, and reproduction in any medium, provided you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons license, and indicate if changes were made. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated.

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Warren, L.R., Harrison, M., Arora, S. et al. Working with patients and the public to design an electronic health record interface: a qualitative mixed-methods study. BMC Med Inform Decis Mak 19, 250 (2019). https://doi.org/10.1186/s12911-019-0993-7

Download citation

  • Received:

  • Accepted:

  • Published:

  • DOI: https://doi.org/10.1186/s12911-019-0993-7

Keywords